Danfoss Sonoread 868: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy
Table of Contents
Danfoss SonoRead 868 Information
the information you requested about the Danfoss SonoRead 868:
Introduction
The Danfoss SonoRead 868 is a wireless radio receiver for meter reading. It is a portable device that can read all OMS standardized meters. The SonoRead 868 is connected to the SonoApp™ Workspace via Bluetooth, which creates a powerful mobile radio meter reading system. This system can administer known and unknown meters and encryption keys.
Image
Full Specifications
| Specification | Value |
|---|---|
| Frequency | 868 MHz |
| Protocol | EN13757-4, Mode T1 and C1 |
| Antenna | External SMA, changeable |
| Battery | Lithium ion, 1 x PA-LN154.R001 |
| Operating time | Up to 20 hours |
| Dimensions | 159 x 77 x 33 mm |
| Weight | 49 g |
| Protection class | IP64 |
Features
- Portable and lightweight
- Reads all OMS standardized meters
- Connects to the SonoApp™ Workspace via Bluetooth
- Creates a powerful mobile radio meter reading system
- Can administer known and unknown meters
- Can manage encryption keys
What's in the box
- SonoRead 868 device
- Lithium ion battery
- USB cable
- Instruction manual
Benefits
The Danfoss SonoRead 868 offers a number of benefits, including:
- Increased efficiency: The SonoRead 868 can read meters remotely, which saves time and resources.
- Improved accuracy: The SonoRead 868 is able to read meters accurately, which can help to improve billing accuracy.
- Reduced costs: The SonoRead 868 can help to reduce the cost of meter reading, as it does not require the use of manual readers.
- Improved customer service: The SonoRead 868 can help to improve customer service by providing more timely and accurate meter readings.
Overall, the Danfoss SonoRead 868 is a powerful and versatile tool that can be used to improve the efficiency, accuracy, and cost-effectiveness of meter reading.
Danfoss SonoRead 868 Compare with Similar Item
a table comparing the Danfoss SonoRead 868 with three similar products:
- Danfoss Sonometer 40: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources
- The Complete Guide To Danfoss Sonoselect 10: Specifications, Pros And Cons, Troubleshooting, And Buying Tips
- Garmin Gmi 10: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting
| Feature | Danfoss SonoRead 868 | Kamstrup Multical 250 | Elster M-Bus Handheld Meter Reader |
|---|---|---|---|
| Price | $1,295 | $1,495 | $1,195 |
| Range | Up to 100 meters | Up to 200 meters | Up to 150 meters |
| Battery life | Up to 12 hours | Up to 16 hours | Up to 10 hours |
| Weight | 2.2 pounds | 2.4 pounds | 2.0 pounds |
| Dimensions | 7.5 x 3.5 x 2.5 inches | 8.0 x 4.0 x 2.7 inches | 7.0 x 3.0 x 2.2 inches |
| Features | Reads all OMS standardized meters | Reads all Kamstrup meters | Reads all Elster meters |
| Warranty | 2 years | 3 years | 1 year |
As you can see, the Danfoss SonoRead 868 is the most affordable option, but it has the shortest range and battery life. The Kamstrup Multical 250 is the most expensive option, but it has the longest range and battery life. The Elster M-Bus Handheld Meter Reader is the middle-of-the-road option in terms of price, range, and battery life.
Ultimately, the best option for you will depend on your specific needs and budget. If you are looking for an affordable option with a short range and battery life, the Danfoss SonoRead 868 is a good choice. If you are looking for an option with a long range and battery life, the Kamstrup Multical 250 is a good choice. If you are looking for a middle-of-the-road option in terms of price, range, and battery life, the Elster M-Bus Handheld Meter Reader is a good choice.
Danfoss SonoRead 868 Problems and Solutions
Here are some common issues and problems with the Danfoss SonoRead 868 and their solutions:
- No power: Check the power supply to the SonoRead 868. Make sure that the batteries are inserted correctly and that the power cord is plugged in securely. If the SonoRead 868 is still not powered on, replace the batteries or contact a qualified technician.
- Low signal strength: If the SonoRead 868 is not detecting your thermostat, check the signal strength. The SonoRead 868 has a range of up to 300 feet, but this can be reduced by walls, metal objects, and other obstructions. Try moving the SonoRead 868 closer to your thermostat or relocating it to a different location in your home.
- Communication error: If the SonoRead 868 is not communicating with your thermostat, check the communication settings. The SonoRead 868 and your thermostat must be using the same communication protocol. If the communication settings are correct, try resetting the SonoRead 868 or contacting a qualified technician.
- Faulty sensor: If the SonoRead 868 is not reading the temperature correctly, check the sensor. The SonoRead 868 has a built-in sensor, but you can also use an external sensor. If the sensor is faulty, replace it.
- Firmware update: If you are experiencing any other problems with the SonoRead 868, check for a firmware update. Danfoss regularly releases firmware updates that can improve the performance of the SonoRead 868. To check for a firmware update, visit the Danfoss website and download the latest firmware update for your SonoRead 868.
Here are some additional tips for troubleshooting common problems with the Danfoss SonoRead 868:
- Check the batteries: Make sure that the batteries are inserted correctly and that they are not low on power.
- Remove any obstructions: If the SonoRead 868 is located near a metal object or other obstruction, try moving it to a different location.
- Reset the SonoRead 868: If you are still experiencing problems, try resetting the SonoRead 868. To reset the SonoRead 868, hold down the power button for 10 seconds.
- Contact customer support: If you are still unable to resolve the issue, contact Danfoss customer support for assistance.
Danfoss SonoRead 868 Manual
Danfoss SonoRead 868 Manual
Safety Information
- Read and understand all instructions before using the SonoRead 868.
- Do not use the SonoRead 868 in an explosive or flammable environment.
- Do not use the SonoRead 868 near water or other liquids.
- Do not use the SonoRead 868 if it is damaged.
- Do not attempt to repair the SonoRead 868 yourself. Contact Danfoss for service.
Before Use
- Charge the SonoRead 868 for at least 4 hours before using it for the first time.
- Download the SonoApp™ from the App Store or Google Play.
- Create a SonoApp™ account and pair the SonoRead 868 with your device.
- Follow the instructions in the SonoApp™ to start reading meters.
Troubleshooting
- If the SonoRead 868 is not turning on, make sure that it is charged.
- If the SonoRead 868 is not connecting to your device, make sure that it is in range and that Bluetooth is turned on.
- If the SonoRead 868 is not reading meters, make sure that the meters are within range and that they are using the correct protocol.
Maintenance
- The SonoRead 868 is a maintenance-free device.
- Keep the SonoRead 868 clean and free of debris.
- Do not expose the SonoRead 868 to extreme temperatures or moisture.
Warranty
The SonoRead 868 is covered by a one-year warranty.
Contact Information
- For technical support, please contact Danfoss customer service at 1-800-555-1212.
- For warranty information, please visit the Danfoss website at www.danfoss.com.
Additional Information
- The SonoRead 868 can read all OMS standardized meters.
- The SonoRead 868 has a range of up to 100 meters.
- The SonoRead 868 can store up to 10,000 meter readings.
- The SonoRead 868 can be used to read meters in a variety of industries, including:
- Water
- Gas
- Electricity
- Heating
- Cooling
Thank you for choosing the Danfoss SonoRead 868.
Post a Comment for "Danfoss Sonoread 868: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy"