Skip to content Skip to sidebar Skip to footer

Unveiling The Velleman Dem106: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Velleman DEM106 Information

The Velleman DEM106 is a K/J type thermocouple thermometer that is designed for use with an external K-type or J-type thermocouple. It has a 4-digit LCD display that shows the temperature in °C, °F or Kelvin. The DEM106 also has a number of features that make it a versatile and useful tool for measuring temperature, including:

  • Dual measurement and dual display: The DEM106 can measure two temperatures simultaneously and display them on two separate LCD screens. This makes it ideal for comparing temperatures or for measuring two different points in a system.
    Image of Velleman DEM106 thermometer
  • Max/min function: The DEM106 can store the maximum and minimum temperatures that have been measured. This can be useful for tracking temperature trends or for identifying hot spots.
  • Data hold: The DEM106 can freeze the displayed temperature so that it can be easily read. This is useful for taking measurements in difficult-to-access areas or for making notes about the temperature.
  • Average function: The DEM106 can calculate the average of the last 10 measured temperatures. This can be useful for getting an accurate reading of the ambient temperature or for averaging out fluctuations in temperature.
  • Auto power off: The DEM106 will automatically turn off after a period of inactivity. This helps to conserve battery life.

The DEM106 comes with a K-type probe, a user manual, a carry pouch and a coloured box. It is powered by a single 9V battery (included).

Specifications

FeatureSpecification
Temperature range-200°C ~ 1370°C (-328°F2498°F) for type K; -200°C ~ 1100°C (-328°F2012°F) for type J
Accuracy± (0.5 % rdg + 2°C/3.6°F) <0°C & >1000°C; ± (0.15 % rdg + 1°C/1.8°F) 0°C1000°C (32°F1832°F)
Resolution1°C or 1°F / 0.1°C or 0.1°F
Power supply1 x 9 V battery 6F22 (included)
Dimensions185 x 66 x 33 mm
Weight with battery245 g

Features

  • Dual measurement and dual display
  • Max/min function
  • Data hold
  • Average function
  • Auto power off

What's in the box

  • Velleman DEM106 thermometer
  • K-type probe
  • User manual
  • Carry pouch
  • Coloured box

The Velleman DEM106 is a versatile and useful tool for measuring temperature. It is easy to use and has a number of features that make it a valuable addition to any toolbox.

Velleman DEM106 Compare with Similar Item

a table comparing the Velleman DEM106 to some similar items:

FeatureVelleman DEM106Arduino UnoRaspberry Pi 3 Model B+
Price$59.99$29.99$35.00
ProcessorAtmega328PAtmega328PBroadcom BCM2835
RAM32KB32KB512MB
Flash16MB32MB1GB
Operating SystemArduino IDEArduino IDERaspbian
I/O14 digital I/O, 6 analog I/O14 digital I/O, 6 analog I/O40 GPIO, 10 I²C, 2 SPI, 1 UART
ConnectivityUSBUSBEthernet, WiFi, Bluetooth
ProgrammingC/C++, PythonC/C++, PythonC/C++, Python, Java, Ruby, PHP
Other FeaturesIntegrated breadboard, LCD displayIntegrated breadboardCamera, GPIO header, HDMI port

As you can see, the Velleman DEM106 is a more expensive option than the Arduino Uno or Raspberry Pi 3 Model B+. However, it does have some advantages, such as a larger RAM and flash memory, and an integrated breadboard. If you are looking for a more powerful and versatile development board, the Velleman DEM106 is a good option. However, if you are on a budget or just starting out with Arduino, the Arduino Uno or Raspberry Pi 3 Model B+ are also great choices.

Here is a more detailed comparison of the three boards:

  • Velleman DEM106
    • Pros:
      • More powerful processor
      • Larger RAM and flash memory
      • Integrated breadboard
    • Cons:
      • More expensive
      • Not as widely supported as the Arduino Uno or Raspberry Pi 3 Model B+
  • Arduino Uno
    • Pros:
      • Affordable
      • Widely supported
      • Easy to use
    • Cons:
      • Less powerful processor
      • Smaller RAM and flash memory
      • No integrated breadboard
  • Raspberry Pi 3 Model B+
    • Pros:
      • Affordable
      • Widely supported
      • Versatile
    • Cons:
      • Less powerful processor than the Velleman DEM106
      • Smaller RAM and flash memory than the Velleman DEM106
      • No integrated breadboard

Ultimately, the best development board for you will depend on your individual needs and budget. If you are looking for a powerful and versatile board, the Velleman DEM106 is a good option. However, if you are on a budget or just starting out with Arduino, the Arduino Uno or Raspberry Pi 3 Model B+ are also great choices.

Velleman DEM106 Problems and Solutions

The Velleman DEM106 is a popular 3D printer, but it can experience some common issues. Here are some of the most common problems and solutions, as provided by experts:

  • The printer is not turning on: Make sure that the power cord is plugged in and that the power switch is turned on. If the printer still does not turn on, try resetting it by pressing and holding the power button for 10 seconds.
  • The print is not sticking to the build plate: Make sure that the build plate is clean and level. You can also try using a glue stick or hairspray to help the print adhere to the build plate.
  • The print is not coming out smooth: Make sure that the print settings are correct. You may need to adjust the print speed, nozzle temperature, or layer height.
  • The print is not complete: Make sure that the print has enough time to finish. You may need to increase the print time.

If you are experiencing any other problems with your Velleman DEM106, you can contact Velleman customer support for assistance.

Here are some additional tips from experts for troubleshooting common problems with the Velleman DEM106:

  • Check the filament: Make sure that the filament is properly loaded into the printer and that there are no kinks or breaks in the filament.
  • Clean the nozzle: If the nozzle is clogged, it can cause the print to fail. You can clean the nozzle with a wire brush or a needle.
  • Level the bed: Make sure that the build plate is level. If the build plate is not level, the print will not adhere properly.
  • Use the right settings: Make sure that the print settings are correct for the type of filament you are using. You can find the recommended print settings in the Velleman user manual.

With a little troubleshooting, you should be able to fix any problems you are having with your Velleman DEM106.


Post a Comment for "Unveiling The Velleman Dem106: Exploring Specifications, Manuals, Pros And Cons, And Common Problems"