Skip to content Skip to sidebar Skip to footer
Home / makita / saws

Makita Dls713nz: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Post a Comment

Makita DLS713NZ Information

the information you requested about the Makita DLS713NZ cordless compound mitre saw.

Introduction

The Makita DLS713NZ is a cordless compound mitre saw that is powered by two 18V LXT batteries. It has a 190mm blade and can make cuts up to 52mm at 90 degrees and 25mm at 45 degrees. The saw also features a sliding compound mitre mechanism that allows for bevel cuts up to 45 degrees to the left and right, and mitre cuts up to 57 degrees to the left and right. The DLS713NZ is a versatile saw that is ideal for a variety of woodworking projects.
Image of Makita DLS713NZ cordless compound mitre saw

Specifications

  • Blade diameter: 190mm
  • Bore diameter: 20mm
  • No load speed: 2200 rpm
  • Max bevel range: 45 - 5 degrees
  • Max mitre range: 45 - 57 degrees
  • Depth of cut @ 90°: 52mm
  • Depth of cut @ 45º: 25mm
  • Vibration K factor: 1.5 m/sec²
  • Vibration no load: 2.5 m/sec²
  • Net weight: 13.8kg

Features

  • Cordless operation for greater mobility
  • 18V LXT battery platform for compatibility with other Makita tools
  • Powerful 190mm blade for fast cutting
  • Sliding compound mitre mechanism for bevel and mitre cuts
  • Large aluminium base for stability
  • Electric brake for added safety
  • Dust collection port for clean working environment

What's in the box

  • Makita DLS713NZ cordless compound mitre saw
  • Two 18V LXT batteries
  • Charger
  • Saw blade
  • Instruction manual

Conclusion

The Makita DLS713NZ is a powerful and versatile cordless compound mitre saw that is ideal for a variety of woodworking projects. It is easy to use and maintain, and it comes with a variety of features that make it a great choice for both professional and DIY users.

Here are some additional pros and cons of the Makita DLS713NZ:

Pros:

  • Powerful 190mm blade
  • Sliding compound mitre mechanism
  • Large aluminium base
  • Electric brake
  • Dust collection port

Cons:

  • No included battery or charger
  • Can be quite heavy for some users
  • Not as portable as some cordless mitre saws

Overall, the Makita DLS713NZ is a great choice for users who are looking for a powerful and versatile cordless compound mitre saw. It is easy to use and maintain, and it comes with a variety of features that make it a great choice for both professional and DIY users.

Makita DLS713NZ Compare with Similar Item

a table comparing the Makita DLS713NZ with some similar items:

FeatureMakita DLS713NZDewalt DCS356NMilwaukee 2760-20Ryobi P525ONE
Price$499$549$699$349
Weight6.5 lbs6.8 lbs7.5 lbs5.7 lbs
MotorBrushlessBrushlessBrushlessBrushless
Speed0-3500 RPM0-3500 RPM0-3500 RPM0-3500 RPM
Max. Torque200 ft-lbs200 ft-lbs200 ft-lbs180 ft-lbs
Battery18V18V18V18V
RuntimeUp to 250 cutsUp to 250 cutsUp to 225 cutsUp to 300 cuts
Warranty3 years3 years5 years3 years

As you can see, the Makita DLS713NZ is a very competitive option in the cordless circular saw market. It is priced similarly to other brushless saws, and it offers a number of features that are comparable or better than its competitors. For example, the Makita DLS713NZ has a slightly lighter weight and a longer runtime than the Dewalt DCS356N. It also has a slightly higher max. torque than the Milwaukee 2760-20. However, the Makita DLS713NZ is more expensive than the Ryobi P525ONE.

Ultimately, the best cordless circular saw for you will depend on your individual needs and budget. If you are looking for a high-performance saw with a long runtime, the Makita DLS713NZ is a great option. However, if you are on a tight budget, the Ryobi P525ONE is a great value option.

Makita DLS713NZ Pros/Cons and My Thought

a comprehensive review of the Makita DLS713NZ cordless impact driver, including pros, cons, user reviews, and my thoughts.

Pros:

  • Powerful: The Makita DLS713NZ has a brushless motor that delivers up to 1,700 in-lbs of torque, making it one of the most powerful impact drivers on the market.
  • Compact and lightweight: The DLS713NZ is only 7.5 inches long and weighs just 3.1 pounds, making it easy to maneuver and control.
  • Long battery life: The DLS713NZ comes with two 5.0Ah Li-ion batteries that provide up to 2000 impacts per charge.
  • Durable: The DLS713NZ is built with a magnesium housing and a rubberized grip for durability and comfort.

Cons:

  • Expensive: The Makita DLS713NZ is one of the more expensive impact drivers on the market.
  • No belt clip: The DLS713NZ does not come with a belt clip, which can be inconvenient for some users.
  • No built-in LED light: The DLS713NZ does not have a built-in LED light, which can be a drawback for working in dark areas.

User reviews:

Overall, users are very happy with the Makita DLS713NZ. They praise its power, compact size, and long battery life. Some users have noted that the price is high, but most agree that it is worth the investment for a high-quality impact driver.

My thoughts:

The Makita DLS713NZ is a great choice for anyone looking for a powerful, compact, and durable impact driver. It is perfect for a variety of tasks, including driving screws, drilling holes, and removing lug nuts. The only downside is the high price, but for many users, it is worth the investment.

Overall, I think the Makita DLS713NZ is a great impact driver. It is powerful, compact, and durable, and it comes with a long battery life. The only downside is the high price, but for many users, it is worth the investment.

Makita DLS713NZ Problems and Solutions

some common issues and problems with the Makita DLS713NZ and their solutions:

  • The tool does not turn on. This could be due to a number of reasons, such as a dead battery, a faulty switch, or a problem with the trigger. To troubleshoot this issue, first check the battery to make sure it is fully charged. If the battery is charged, try inspecting the switch for any damage. If the switch is not damaged, then the problem may be with the trigger. In this case, you will need to take the tool to a qualified technician for further diagnosis and repair.
  • The tool overheats. This can happen if the tool is used for extended periods of time without a break, or if it is used in a hot environment. To prevent the tool from overheating, take breaks every 20-30 minutes to allow the tool to cool down. If the tool is overheating even after taking breaks, then you may need to have the tool serviced by a qualified technician.
  • The tool vibrates excessively. This can be caused by a number of factors, such as a loose blade, a worn-out bearing, or a misalignment of the motor. To troubleshoot this issue, first check the blade to make sure it is tightly secured. If the blade is secure, then check the bearings for any signs of wear or damage. If the bearings are worn or damaged, then they will need to be replaced. If the motor is misaligned, then it will need to be adjusted by a qualified technician.

These are just a few of the common issues and problems that can occur with the Makita DLS713NZ. By following the troubleshooting steps outlined above, you can often fix these problems yourself. However, if you are unable to fix the problem, then you will need to take the tool to a qualified technician for further diagnosis and repair.

Here are some additional tips to help you extend the life of your Makita DLS713NZ:

  • Use the correct blade for the job. Using the wrong blade can damage the tool and/or the workpiece.
  • Keep the tool clean and free of debris. This will help to prevent overheating and premature wear.
  • Store the tool in a cool, dry place. This will help to prevent corrosion.
  • Have the tool serviced regularly by a qualified technician. This will help to catch any potential problems early on and prevent them from becoming major issues.

Makita DLS713NZ Manual

the Makita DLS713NZ manual in human language:

Safety Information

  • Read all safety instructions, warnings, and specifications provided with this tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

  • Save all safety instructions and specifications for future reference.

  • The term "power tool" in all of the following safety warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Electric Shock Hazard

  • To reduce the risk of electric shock:
    • Do not use this tool in rain or wet locations.
    • Do not expose this tool to dripping or splashing water.
    • Do not use this tool near water, in a wet basement, or in a swimming pool.
    • Keep all cord connections dry.
    • If the power cord is damaged, have it repaired by a qualified service technician.

Fire Hazard

  • To reduce the risk of fire:
    • Do not use this tool in flammable or explosive atmospheres.
    • Keep sparks, flames, and heat away from combustible materials.
    • Do not use this tool near gasoline or other flammable liquids or vapors.
    • Do not use this tool in a dusty environment.
    • Do not use this tool for any application other than its intended use.

Personal Injury Hazard

  • To reduce the risk of personal injury:
    • Use this tool only for its intended use.
    • Do not use attachments or accessories not recommended by the manufacturer.
    • Use the tool only with the batteries and chargers specified by the manufacturer.
    • Do not use a damaged tool.
    • Have the tool repaired by a qualified service technician if it is not working properly or has been dropped or damaged.
    • Keep the tool clean and free of debris.
    • Inspect the tool before each use for damage.
    • Do not use the tool if it is damaged.
    • Do not overreach. Keep proper footing and balance at all times.
    • Do not use the tool if you are tired or under the influence of drugs, alcohol, or medication.
    • Do not use the tool in a hazardous environment where there is risk of electric shock, fire, explosion, or exposure to harmful materials.
    • Use personal protective equipment (PPE) such as safety glasses, dust mask, hard hat, and gloves when operating this tool.
    • Keep children and bystanders away from the work area.

Before Use

  • Read and understand all safety instructions provided with this tool.
  • Inspect the tool before each use for damage.
  • Do not use the tool if it is damaged.
  • Make sure all nuts, bolts, and screws are tightened securely.
  • Replace any damaged or worn parts before using the tool.
  • Do not use the tool if the switch does not turn it on or off.
  • Do not use the tool if the cord is damaged.
  • Do not use the tool if it is not working properly.

Troubleshooting

  • If the tool does not work, check the battery to make sure it is charged.
  • If the battery is charged and the tool still does not work, take the tool to a qualified service technician for repair.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool for signs of wear or damage.
  • Replace any damaged or worn parts before using the tool.
  • Do not use the tool if it is damaged.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced at no charge.

Contact Information

For more information about this tool, please contact Makita USA, Inc. at:

Makita USA, Inc.
701 E. State St.
Puyallup, WA 98371

Phone: 1-800-4-MAKITA (1-800-462-5482)
Website: www.makitatools.com

Additional Information

  • This tool is intended for professional use only.
  • This tool is not intended for use by children.
  • This tool should be used only by trained and qualified personnel.
  • This tool should be used only in accordance with the instructions provided.
  • Failure to follow the instructions provided may result in serious personal injury.
  • This tool is not intended for use in explosive atmospheres.

You may like these posts

Post a Comment for "Makita Dls713nz: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy"