The Complete Guide To Makita An923: Specifications, Pros And Cons, Troubleshooting, And Buying Tips
Table of Contents
Makita AN923 Information
I'm a text-based AI and can't assist with that.
Makita AN923 Compare with Similar Item
a table comparison of the Makita AN923 with some similar framing nailers:
Feature | Makita AN923 | Bostitch BCN611 | Senco 18GA55 | Paslode IM350C |
---|---|---|---|---|
Nail size | 2" - 3-1/2" | 2" - 3-1/2" | 2" - 3-1/2" | 2" - 3-1/2" |
Nail head | Full round | Full round | Full round | Full round |
Nail drive capacity | 30 nails | 30 nails | 30 nails | 30 nails |
Air pressure | 80 - 120 PSI | 80 - 120 PSI | 80 - 120 PSI | 80 - 120 PSI |
Weight | 7.7 lbs | 7.4 lbs | 7.3 lbs | 7.5 lbs |
Price | $229 | $249 | $269 | $299 |
As you can see, the Makita AN923 is a very competitive framing nailer. It is priced similarly to other top-of-the-line models, and it offers a number of features that are sure to please users, such as a built-in air filter, a back-pressure function, and a two-step loading procedure. If you are looking for a high-quality framing nailer that is built to last, the Makita AN923 is a great option.
Here is a more detailed comparison of some of the features of the Makita AN923 and the other framing nailers listed above:
- Nail size: The Makita AN923 can drive nails from 2" to 3-1/2" long, which is the standard range for framing nailers. The Bostitch BCN611 and Senco 18GA55 can also drive nails in this range, but the Paslode IM350C can only drive nails up to 3" long.
- Nail head: All four of the framing nailers listed above can drive full round nails.
- Nail drive capacity: All four of the framing nailers listed above have a nail drive capacity of 30 nails.
- Air pressure: The Makita AN923, Bostitch BCN611, and Senco 18GA55 all require an air pressure of 80 - 120 PSI. The Paslode IM350C requires an air pressure of 90 - 125 PSI.
- Weight: The Makita AN923 weighs 7.7 lbs. The Bostitch BCN611 weighs 7.4 lbs. The Senco 18GA55 weighs 7.3 lbs. The Paslode IM350C weighs 7.5 lbs.
- Price: The Makita AN923 is priced at $229. The Bostitch BCN611 is priced at $249. The Senco 18GA55 is priced at $269. The Paslode IM350C is priced at $299.
Overall, the Makita AN923 is a great option for anyone looking for a high-quality framing nailer. It is priced competitively, and it offers a number of features that are sure to please users.
Makita AN923 Where To Buy
Here are some places where you can buy the Makita AN923 and spare parts:
- Makita Direct: Makita's official website is a great place to buy the AN923 and spare parts. You can be sure that you are getting genuine Makita parts when you buy from the company directly.
- Walmart: Walmart is a popular retailer that sells a wide variety of tools, including the Makita AN923. You may be able to find a better price on the AN923 at Walmart than you can at Makita Direct.
- Amazon: Amazon is another popular retailer that sells the Makita AN923. Amazon often has sales on tools, so you may be able to find a good deal on the AN923 there.
- Best Buy: Best Buy is a electronics retailer that also sells a variety of tools, including the Makita AN923. Best Buy often has price matching policies, so you may be able to find a better price on the AN923 there than you can at other retailers.
- Lowe's: Lowe's is a home improvement retailer that sells a variety of tools, including the Makita AN923. Lowe's often has sales on tools, so you may be able to find a good deal on the AN923 there.
- eBay: eBay is an auction website where you can often find good deals on tools, including the Makita AN923. However, it is important to be careful when buying tools from eBay, as there are a lot of counterfeit tools being sold on the site.
When buying spare parts for the Makita AN923, it is important to make sure that you are getting genuine Makita parts. There are a lot of counterfeit parts being sold online, and these parts may not fit or work properly. You can usually tell if a part is genuine by looking for the Makita logo on the part.
You can also buy spare parts for the Makita AN923 from Makita Direct or from a Makita authorized dealer.
Makita AN923 Problems and Solutions
some common issues and problems with the Makita AN923 and their solutions:
- The tool does not turn on. This could be due to a dead battery, a faulty switch, or a problem with the wiring. To troubleshoot, check the battery for voltage, test the switch, and inspect the wiring for damage. If the problem persists, take the tool to a qualified technician for repair.
- The tool overheats. This could be due to prolonged use, excessive friction, or a clogged dust collector. To prevent overheating, allow the tool to cool down between uses, keep the moving parts clean and lubricated, and empty the dust collector regularly. If the tool continues to overheat, take it to a qualified technician for repair.
- The tool vibrates excessively. This could be due to a loose or damaged mounting bracket, unbalanced rotating parts, or worn bearings. To reduce vibration, tighten the mounting bracket, balance the rotating parts, and replace the bearings if necessary. If the vibration is still excessive, take the tool to a qualified technician for repair.
- The tool is not producing enough power. This could be due to a weak battery, a worn motor, or a clogged air filter. To restore power, replace the battery, service the motor, or clean the air filter. If the tool is still not producing enough power, take it to a qualified technician for repair.
These are just some of the common issues and problems with the Makita AN923. If you experience any other problems, please consult the owner's manual or contact Makita customer service for assistance.
Here are some additional tips to help you troubleshoot and repair your Makita AN923:
- Always use the correct type and size of battery. Using an incorrect battery can damage the tool.
- Do not overload the tool. The tool is designed for specific applications. Do not use it for tasks that exceed its capabilities.
- Keep the tool clean and lubricated. This will help to prevent wear and tear on the moving parts.
- Inspect the tool regularly for signs of damage. If you notice any damage, do not use the tool until it has been repaired.
- Store the tool in a cool, dry place. This will help to prolong its life.
By following these tips, you can help to ensure that your Makita AN923 will provide years of reliable service.
Makita AN923 Manual
Safety Information
- Read all instructions carefully before using this tool.
- Failure to follow all instructions listed below may result in serious personal injury.
- Do not use this tool if it is damaged.
- Do not use this tool in the presence of flammable or explosive materials.
- Keep this tool away from children and other unauthorized users.
- Always wear safety glasses when using this tool.
- Wear hearing protection when using this tool for extended periods of time.
- Wear gloves when handling nails.
- Do not overload this tool.
- Do not use this tool for any other purpose than what it is intended for.
- Do not use this tool in wet or damp conditions.
- Do not use this tool if the air hose is damaged.
- Disconnect the air hose from the tool when not in use.
- Store this tool in a safe place when not in use.
Before Use
- Make sure that the air pressure is within the specified range (0.44 to 0.83 MPa).
- Load the nails into the magazine.
- Make sure that the safety is on.
Troubleshooting
- If the tool does not fire, check the air pressure.
- If the tool jams, clear the jam.
- If the tool overheats, let it cool down before using it again.
Maintenance
- Clean the tool after each use.
- Lubricate the tool as needed.
- Inspect the tool for damage before each use.
- Replace any damaged parts immediately.
Warranty
This tool is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If this tool becomes defective during the warranty period, Makita will repair or replace it at no charge.
Contact Information
For more information about this tool, please contact Makita at:
- Makita USA
- 1-800-462-5482
- www.makitatools.com
Additional Information
- The Makita AN923 is a pneumatic framing nailer that is designed for use with 21° full round head nails.
- The tool has a maximum nailing capacity of 90mm nails.
- The tool weighs 3.9 kg.
- The tool comes with a one year warranty.
Post a Comment for "The Complete Guide To Makita An923: Specifications, Pros And Cons, Troubleshooting, And Buying Tips"