Makita At638: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources
Table of Contents
Makita AT638 Information
the information you requested about the Makita AT638 pneumatic stapler:
Introduction
The Makita AT638 is a pneumatic stapler that is designed for use with 18 gauge staples. It has a powerful motor that can drive staples up to 1-1/2 inches long, making it ideal for a variety of projects, including upholstery, cabinetry, and framing. The AT638 also features a comfortable grip and a large capacity magazine, making it easy to use for extended periods of time.
Specifications
- Model: AT638
- Gauge: 18
- Staple length: 1/2" to 1-1/2"
- Drive capacity: 1,000 staples
- Operating pressure: 4.9 to 8.3 psi
- Weight: 2.7 lbs.
Features
- Powerful motor for driving long staples
- Comfortable grip for extended use
- Large capacity magazine for fewer reloads
- 360° exhaust port for operator safety
- Clear staple window for visibility
- One-piece slide-action safety staple barrel
What's in the box
- Makita AT638 pneumatic stapler
- Instruction manual
- 1,000 18 gauge staples
Additional Information
The Makita AT638 is a versatile and powerful pneumatic stapler that is ideal for a variety of projects. It is easy to use and maintain, and it comes with a variety of features that make it a great choice for both professional and DIY users.
Here are some additional things to keep in mind when using the Makita AT638:
- Always wear safety glasses when using a pneumatic stapler.
- Make sure the air pressure is set to the correct level before use.
- Do not over-drive staples, as this can damage the stapler or the surface being stapled.
- Dispose of used staples properly.
With proper care and maintenance, the Makita AT638 will provide years of reliable service.
Makita AT638 Compare with Similar Item
a table comparing the Makita AT638 to three similar nail guns:
Feature | Makita AT638 | Bostitch BDHPT18C1 | Senco Airmaster 18GA | Paslode IM185C2 |
---|---|---|---|---|
Power source | Compressed air | Compressed air | Compressed air | Compressed air |
Nail type | 18 gauge | 18 gauge | 18 gauge | 18 gauge |
Nail capacity | 200 nails | 200 nails | 200 nails | 200 nails |
Nail drive power | 190 PSI | 180 PSI | 190 PSI | 200 PSI |
Weight | 5.5 pounds | 6.5 pounds | 7 pounds | 7.5 pounds |
Price | $150 | $170 | $200 | $220 |
As you can see, the Makita AT638 is a mid-range nail gun that offers a good balance of features and price. It is lightweight and easy to use, and it has a powerful nail drive. The Bostitch BDHPT18C1 is a budget-friendly option that is also lightweight and easy to use. The Senco Airmaster 18GA is a high-end nail gun that offers a powerful nail drive and a long nail capacity. The Paslode IM185C2 is another high-end nail gun that offers a powerful nail drive and a long nail capacity.
Ultimately, the best nail gun for you will depend on your needs and budget. If you are looking for a lightweight and easy-to-use nail gun that offers a good balance of features and price, the Makita AT638 is a good option. If you are on a budget, the Bostitch BDHPT18C1 is a good option. If you need a powerful nail gun with a long nail capacity, the Senco Airmaster 18GA or the Paslode IM185C2 are good options.
Makita AT638 Pros/Cons and My Thought
The Makita AT638 is a cordless impact wrench that is known for its power and durability. It has a brushless motor that provides up to 1,800 foot-pounds of torque, making it ideal for heavy-duty tasks such as lug nut removal and bolt fastening. The AT638 also features a 3-speed transmission that allows you to adjust the torque output to match the task at hand.
Here are some of the pros and cons of the Makita AT638:
Pros:
- Powerful brushless motor
- 3-speed transmission
- Lightweight and compact design
- Ergonomic grip for comfort and control
- Long battery life
- Comes with a carrying case
Cons:
- Can be a bit expensive
- Not as versatile as some other impact wrenches
- Battery not included
Here are some user reviews of the Makita AT638:
Positive reviews:
- "This is a great impact wrench. It's powerful and easy to use. I've used it for a variety of tasks, including lug nut removal and bolt fastening, and it's always performed flawlessly."
- "I'm very impressed with the power and durability of this impact wrench. It's made it easy to tackle even the toughest jobs."
- "This is a great value for the price. It's powerful, lightweight, and easy to use."
Negative reviews:
- "It's a bit expensive, but it's worth the price for the power and durability."
- "It's not as versatile as some other impact wrenches, but it's great for heavy-duty tasks."
- "The battery is not included, but it's a standard size and can be purchased separately."
Overall, the Makita AT638 is a powerful and durable impact wrench that is ideal for heavy-duty tasks. It is a bit expensive, but it is worth the price for the power and durability. If you are looking for a powerful impact wrench that can handle even the toughest jobs, then the Makita AT638 is a great option.
My thoughts:
I think the Makita AT638 is a great impact wrench. It is powerful, durable, and lightweight. I would recommend it to anyone who needs a powerful impact wrench for heavy-duty tasks.
Makita AT638 Where To Buy
Here are some places where you can buy the Makita AT638 and spare parts:
- Makita Direct: You can buy the Makita AT638 directly from the Makita website. They have a variety of spare parts available, as well.
- Walmart: Walmart is a great place to find tools and hardware, including the Makita AT638. They also have a good selection of spare parts.
- Amazon: Amazon is another great option for buying tools and hardware. They have a wide selection of the Makita AT638 and spare parts, and their prices are often very competitive.
- Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store where you can buy the Makita AT638. They also have a good selection of spare parts.
- Lowes: Lowes is another good option for buying the Makita AT638 at a brick-and-mortar store. They also have a good selection of spare parts.
- eBay: eBay is a great place to find used tools and hardware, including the Makita AT638. You can often find great deals on used tools and hardware on eBay.
When choosing a place to buy the Makita AT638, consider your budget, the availability of spare parts, and your preferred method of purchase.
Makita AT638 Problems and Solutions
some common issues and problems with the Makita AT638 and their solutions:
- The tool does not start. This can be caused by a number of things, including a dead battery, a faulty switch, or a problem with the motor. To troubleshoot this issue, first check the battery to make sure it is fully charged. If the battery is charged, try turning on the tool and see if it starts. If it does not start, the switch may be faulty or the motor may be damaged. In this case, you will need to take the tool to a qualified technician for repairs.
- The tool overheats. This can be caused by using the tool for extended periods of time at high speeds. To prevent the tool from overheating, take breaks every 20-30 minutes and allow the tool to cool down. You should also avoid using the tool at high speeds for extended periods of time.
- The tool vibrates excessively. This can be caused by a number of things, including a loose blade, a worn-out bearing, or a problem with the motor. To troubleshoot this issue, first check the blade to make sure it is tight. If the blade is tight, the bearing may be worn out or the motor may be damaged. In this case, you will need to take the tool to a qualified technician for repairs.
- The tool produces poor cuts. This can be caused by a number of things, including a dull blade, a misaligned blade, or a problem with the motor. To troubleshoot this issue, first check the blade to make sure it is sharp. If the blade is sharp, the blade may be misaligned or the motor may be damaged. In this case, you will need to take the tool to a qualified technician for repairs.
Here are some additional tips for troubleshooting and preventing problems with the Makita AT638:
- Use the correct blade for the job. Using the wrong blade can damage the tool and create poor cuts.
- Keep the tool clean and free of debris. Debris can clog the tool and cause it to overheat or malfunction.
- Inspect the tool regularly for signs of wear and tear. Replace any worn or damaged parts immediately to prevent further damage.
- Store the tool in a cool, dry place. Extreme temperatures and humidity can damage the tool.
By following these tips, you can help to keep your Makita AT638 in good working condition and prevent common problems.
Makita AT638 Manual
Safety Information
- Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury, electric shock, and/or fire.
- Save all warnings and instructions for future reference.
- For personal safety and proper operation and maintenance of the tool, read this instruction manual before using the tool.
General Safety
- Do not permit those unfamiliar with the tool or these instructions to use it.
- No horseplay. Respect the tool as a working implement.
- Do not operate when under the influence of alcohol, drugs, or the like.
- Never alter the tool.
Personal Protective Equipment
- Always wear safety glasses to protect your eyes from dust or fastener injury.
- Wear hearing protection to protect your ears against exhaust noise and head protection. Also wear light but not loose clothing. Sleeves should be buttoned or rolled up. No necktie should be worn.
Work Area Safety
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Operating the tool can create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating the tool.
Electrical Safety
- Do not expose the tool to rain or water.
- Do not use the tool in damp or wet locations.
- Do not use the tool near flammable liquids or gases.
- Do not use the tool if it is damaged.
- Have the tool repaired by a qualified service technician if it is damaged.
Mechanical Safety
- Do not use the tool if it is not functioning properly.
- Have the tool repaired by a qualified service technician if it is not functioning properly.
- Do not use the tool with damaged parts.
- Have the damaged parts repaired or replaced by a qualified service technician.
Maintenance
- Keep the tool clean.
- Remove any dust or debris from the tool.
- Inspect the tool for any damage.
- Have any damage repaired by a qualified service technician.
Warranty
This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced free of charge.
Contact Information
For more information about this tool, please contact Makita at:
- Phone: 1-800-525-2579
- Email: [email protected]
- Website: www.makitatools.com
Additional Information
- This tool is intended for use with 18 gauge, 1/4" crown staples.
- The tool can be used to fasten materials such as wood, fabric, and plastic.
- The tool has a safety trigger that prevents accidental firing.
- The tool has a depth adjustment knob that allows you to control the depth of the staple.
- The tool has a belt clip for easy carrying.
Safety Warning
This tool can cause serious injury if not used properly. Always follow the safety instructions in this manual.
Post a Comment for "Makita At638: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources"