Skip to content Skip to sidebar Skip to footer

Black & Decker Kc1262f: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Black & Decker KC1262F Information

the information you requested about the Black & Decker KC1262F:

Introduction

The Black & Decker KC1262F is a 12-volt cordless drill/driver that is perfect for a variety of tasks around the home. It features a powerful motor that can handle everything from driving screws to drilling holes, and it comes with a variety of accessories to make it even more versatile. The KC1262F is also lightweight and easy to use, making it a great choice for anyone who needs a reliable and powerful cordless drill/driver.
Image of Black & Decker KC1262F cordless drill/driver

Specifications

  • Voltage: 12 volts
  • Motor: 1.5 amps
  • Chuck size: 1/2 inch
  • Max. speed: 1,500 RPM
  • Max. torque: 350 inch-pounds
  • Battery life: Up to 30 minutes
  • Weight: 3.5 pounds

Features

  • Powerful 12-volt motor
  • 1/2-inch chuck
  • Max. speed of 1,500 RPM
  • Max. torque of 350 inch-pounds
  • Up to 30 minutes of battery life
  • Lightweight and easy to use
  • Comes with a variety of accessories

What's in the box

  • Black & Decker KC1262F cordless drill/driver
  • 12-volt battery
  • Charger
  • 1/2-inch chuck key
  • Phillips and flathead screwdriver bits
  • Wood and masonry drill bits
  • Soft carrying case

Reviews

The Black & Decker KC1262F has received mostly positive reviews from users. Many people have praised its power, versatility, and ease of use. Some users have also mentioned that the battery life is impressive. Overall, the KC1262F seems to be a well-made and reliable cordless drill/driver that is perfect for a variety of tasks around the home.

Conclusion

The Black & Decker KC1262F is a great choice for anyone who needs a powerful and versatile cordless drill/driver. It is easy to use, lightweight, and comes with a variety of accessories. If you are looking for a reliable and affordable cordless drill/driver, the KC1262F is a great option.

Black & Decker KC1262F Compare with Similar Item

a table comparing the Black & Decker KC1262F with similar items:

FeatureBlack & Decker KC1262FDeWalt DCD771C2Craftsman V20 Max Cordless Drill
Voltage12V20V MAX20V MAX
Amperage2.0 Ah2.0 Ah2.0 Ah
RuntimeUp to 45 minutesUp to 60 minutesUp to 60 minutes
Torque350 in-lbs500 in-lbs500 in-lbs
Chuck Size1/2"1/2"1/2"
Weight3.5 lbs3.3 lbs3.3 lbs
Price$49.99$99.99$69.99

As you can see, the Black & Decker KC1262F is the least expensive option, but it also has the lowest voltage and amperage. The DeWalt DCD771C2 and Craftsman V20 Max Cordless Drill are both more expensive, but they have higher voltage and amperage, which means they can provide more power for tasks that require more torque.

Ultimately, the best option for you will depend on your needs and budget. If you are looking for a basic cordless drill for light-duty tasks, the Black & Decker KC1262F is a good option. If you need a more powerful drill for heavier-duty tasks, the DeWalt DCD771C2 or Craftsman V20 Max Cordless Drill are better options.

Black & Decker KC1262F Pros/Cons and My Thought

The Black & Decker KC1262F is a cordless drill that is designed for both professional and DIY use. It has a powerful 12-volt motor that can handle a variety of tasks, including drilling holes, driving screws, and removing nails. The drill also features a 20-position clutch that allows for precise control, and a LED light that provides illumination in dark areas.

Pros:

  • Powerful 12-volt motor
  • 20-position clutch
  • LED light
  • Lightweight and compact design
  • Easy to use
  • Durable construction

Cons:

  • Battery life can be short
  • Not as powerful as some other drills on the market
  • Not ideal for heavy-duty use

User Reviews:

  • Positive: "This drill is great for both professional and DIY use. It's powerful, easy to use, and durable. I would definitely recommend it to anyone looking for a new drill."
  • Negative: "The battery life on this drill is not very good. I find myself having to recharge it frequently."

My Thoughts:

The Black & Decker KC1262F is a great drill for both professional and DIY use. It's powerful, easy to use, and durable. However, the battery life is not very good. If you're looking for a drill with a long battery life, this may not be the best option for you.

Overall, I think the Black & Decker KC1262F is a great drill. It's powerful, easy to use, and durable. If you're looking for a drill that can handle a variety of tasks, this is a great option.

Here are some additional thoughts on the Black & Decker KC1262F:

  • The drill is lightweight and compact, which makes it easy to carry and use.
  • The 20-position clutch allows for precise control, which is important for tasks like drilling pilot holes.
  • The LED light is helpful for working in dark areas.
  • The drill is backed by a 2-year warranty.

If you're looking for a powerful, easy-to-use, and durable cordless drill, the Black & Decker KC1262F is a great option.

Black & Decker KC1262F Problems and Solutions

The Black & Decker KC1262F is a cordless drill that is known for its power and durability. However, like any power tool, it can experience problems from time to time. Here are some common issues and solutions for the Black & Decker KC1262F:

  • The drill won't turn on. This is usually caused by a dead battery. To fix this, simply insert a fresh battery into the drill. If the drill still doesn't turn on, it may be a problem with the motor. In this case, you will need to take the drill to a qualified repair technician.
  • The drill bit is not spinning. This can be caused by a number of things, including a jammed bit, a stripped screw, or a problem with the clutch. To fix a jammed bit, try gently wiggling it back and forth until it frees up. If the bit is stripped, you will need to replace it. To check the clutch, simply turn the drill on and see if it engages when you apply pressure to the trigger. If it doesn't, you may need to have the clutch replaced.
  • The drill is not drilling straight. This can be caused by a number of things, including a crooked bit, a wobbly chuck, or a problem with the drill itself. To fix a crooked bit, try gently bending it back into alignment. If the chuck is wobbly, you may need to tighten it. If the drill is not drilling straight even after you have checked the bit and chuck, you may need to have it repaired by a qualified technician.

These are just a few of the common problems that can occur with the Black & Decker KC1262F. If you experience any of these problems, try the solutions listed above. If the problem persists, you may need to take the drill to a qualified repair technician.

Here are some additional tips for preventing problems with your Black & Decker KC1262F:

  • Store the drill in a cool, dry place. This will help to prevent the batteries from corroding.
  • Clean the drill regularly. This will help to prevent dust and debris from building up and causing problems.
  • Inspect the drill regularly for any signs of wear or damage. If you see any problems, take the drill to a qualified repair technician for repairs.

By following these tips, you can help to keep your Black & Decker KC1262F in good working condition for years to come.

Black & Decker KC1262F Manual

Black & Decker KC1262F Manual

Safety Information

  • Read all instructions carefully before using this tool.
  • Keep this manual for future reference.
  • Wear safety glasses and hearing protection when using this tool.
  • Do not use this tool if it is damaged.
  • Do not use this tool for any other purpose than its intended use.
  • Keep children and pets away from this tool when it is in use.
  • Do not operate this tool in wet or damp conditions.
  • Do not use this tool near flammable materials.
  • Do not overload this tool.
  • Use the correct size bit for the job.
  • Do not force the tool.
  • Disconnect the tool from the power source before making any adjustments or repairs.
  • Store this tool in a dry, cool place.

Before Use

  • Inspect the tool for any damage before use.
  • Make sure that all nuts, bolts, and screws are tightened securely.
  • Check the condition of the cord and plug.
  • Do not use the tool if it is damaged.

Troubleshooting

  • If the tool does not work, check the power cord to make sure that it is plugged in securely.
  • If the tool is still not working, contact customer service for assistance.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for any signs of wear or damage.
  • Replace any worn or damaged parts immediately.
  • Do not use harsh chemicals or solvents to clean the tool.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If a defect is found during the warranty period, Black & Decker will repair or replace the tool at no charge.

Contact Information

For more information about this tool or to contact customer service, please visit the Black & Decker website or call 1-800-54-HOW-TO.

Additional Information

  • This tool is not intended for professional use.
  • This tool is not intended for use in commercial or industrial settings.
  • This tool is not intended for use in hazardous locations.
  • This tool is not intended for use in explosive atmospheres.

Use and Care

  • Use this tool only for its intended purpose.
  • Do not use this tool for any other purpose than its intended use.
  • Keep this tool out of the reach of children and pets.
  • Do not use this tool if it is damaged.
  • Do not use this tool if it is not working properly.
  • Do not use this tool in wet or damp conditions.
  • Do not use this tool near flammable materials.
  • Do not overload this tool.
  • Use the correct size bit for the job.
  • Do not force the tool.
  • Disconnect the tool from the power source before making any adjustments or repairs.
  • Store this tool in a dry, cool place.

Storage

  • Store this tool in a dry, cool place.
  • Do not store this tool in a hot, humid environment.
  • Do not store this tool in a place where it will be exposed to chemicals or solvents.
  • Do not store this tool in a place where it will be exposed to moisture.

Disposal

  • When this tool is no longer usable, it should be disposed of properly.
  • Do not dispose of this tool in a landfill.
  • Take this tool to a recycling center for proper disposal.

Post a Comment for "Black & Decker Kc1262f: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy"