Unraveling Makita 9403: From Full Specifications To Potential Issues

August 04, 2022 Post a Comment

Makita 9403 Information
Introduction
Specifications
Features
What's in the Box
Additional Information
Makita 9403 Compare with Similar Item
Makita 9403 Pros/Cons and My Thought
Makita 9403 Where To Buy
Makita 9403 Problems and Solutions
Makita 9403 Manual

Makita 9403 Information

the information you requested about the Makita 9403 belt sander.

Introduction

The Makita 9403 is a 4" x 24" belt sander that is ideal for woodworkers, carpenters, furniture makers, floor installers, deck builders, and general contractors. It features a powerful 11 AMP motor that delivers a belt speed of 1,640 ft./min. for fast stock removal. The 9403 also features a large front grip and a low noise level (84dB) for operator comfort.

Specifications

Motor: 11 AMP
Belt Speed: 1,640 ft./min.
Belt Width: 4"
Belt Length: 24"
Dust Collection: 2-1/2" dust port
Weight: 12.6 lbs.

Features

Powerful 11 AMP motor delivers a belt speed of 1,640 ft./min. for fast stock removal
Large front grip for operator comfort
Low noise level (84dB)
Dust collection system with 2-1/2" dust port
Easy-to-change belt system with quick-release lever
Dust bag included

What's in the Box

Makita 9403 belt sander
1 x 4" x 24" sanding belt (60 grit)
1 x dust bag
Instruction manual

Additional Information

The Makita 9403 is backed by a 3-year limited warranty. It is a versatile tool that can be used for a variety of woodworking projects, including:

Sanding rough lumber
Shaping curves and edges
Removing finish
Preparing surfaces for painting or staining
Leveling joints
Creating smooth finishes

The Makita 9403 is a powerful and versatile belt sander that is ideal for a variety of woodworking projects. It is easy to use and maintain, and it is backed by a 3-year limited warranty.

Makita 9403 Compare with Similar Item

a table comparing the Makita 9403 to some similar belt sanders:

Feature	Makita 9403	DeWalt DWE6421	Bosch ROS20VS
Motor	11 amps	13 amps	12 amps
Belt speed	1,640 ft./min.	1,725 ft./min.	1,620 ft./min.
Belt width	4"	3.5"	3"
Belt length	24"	21"	18"
Weight	10.2 lbs.	10.4 lbs.	11.4 lbs.
Noise level	84 dB	85 dB	86 dB
Dust collection	Dust bag	Dust bag	Dust port
Price	$249	$299	$279

As you can see, the Makita 9403 is a powerful and versatile belt sander that is well-suited for a variety of tasks. It has a powerful motor, a wide belt, and a long belt length, which makes it ideal for fast material removal. It is also relatively lightweight and quiet, making it comfortable to use for extended periods of time. However, it is not the most affordable option on the market.

The DeWalt DWE6421 is a slightly more powerful option that offers a faster belt speed. It is also slightly heavier and louder than the Makita 9403. However, it is more affordable.

The Bosch ROS20VS is a good option for users who want a more compact and lightweight belt sander. It has a slightly slower belt speed than the Makita 9403, but it is still powerful enough for most tasks. It is also more affordable than the Makita 9403.

Ultimately, the best belt sander for you will depend on your specific needs and budget. If you are looking for a powerful and versatile belt sander, the Makita 9403 is a great option. If you are looking for a more affordable option, the DeWalt DWE6421 or the Bosch ROS20VS are good choices.

Makita 9403 Pros/Cons and My Thought

The Makita 9403 is a 4”x 24” belt sander that is well-respected by users for its power, durability, and ease of use. It is a great choice for a variety of woodworking projects, from rough-sanding lumber to finishing furniture.

Here are some of the pros and cons of the Makita 9403:

Pros:

Powerful motor: The Makita 9403 has a powerful 1.5-horsepower motor that provides plenty of power for even the most demanding sanding tasks.
Durable construction: The Makita 9403 is built to last with a heavy-duty metal frame and a durable belt guard.
Easy to use: The Makita 9403 is easy to use with a comfortable pistol grip and a simple on/off switch.
Variable speed: The Makita 9403 has a variable speed dial that allows you to control the speed of the sander for different tasks.
Dust collection: The Makita 9403 has a built-in dust collection system that helps to keep your work area clean.

Cons:

Price: The Makita 9403 is a bit more expensive than some other belt sanders on the market.
Weight: The Makita 9403 is a bit heavy, which can make it difficult to use for extended periods of time.
Vibration: The Makita 9403 can vibrate a bit, which can be uncomfortable for some users.

Overall, the Makita 9403 is a great choice for a powerful and durable belt sander. It is a bit more expensive than some other models, but it is worth the investment for users who need a reliable and high-quality tool.

Here are some user reviews of the Makita 9403:

Positive reviews:

"This is a great belt sander. It's powerful and easy to use. I've used it for a variety of projects and it's always done a great job."
"I've had this sander for a few years now and it's still going strong. It's well-built and it's easy to keep clean. I would definitely recommend it to anyone looking for a belt sander."
"This is the best belt sander I've ever owned. It's powerful, easy to use, and it's built to last. I would highly recommend it to anyone."

Negative reviews:

"This sander is a bit heavy, which can make it difficult to use for extended periods of time."
"The sander can vibrate a bit, which can be uncomfortable for some users."
"The dust collection system isn't the best, but it's better than nothing."

Makita 9403 Where To Buy

Here are some places where you can buy the Makita 9403 belt sander and spare parts:

Makita Direct: This is the manufacturer's website, so you can be sure that you're getting an authentic product. Shipping is free on orders over $49.
Walmart: Walmart is a great option if you're looking for a low price. The Makita 9403 is often on sale, and you can also use coupons to save even more money.
Amazon: Amazon is another great option for finding the Makita 9403. You'll have a wide selection to choose from, and you can often find the sander for a lower price than at other retailers.
Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store where you can buy the Makita 9403. You can also get the sander with a Geek Squad protection plan, which can be helpful if something goes wrong with it.
Lowes: Lowes is another good option for buying the Makita 9403 at a brick-and-mortar store. You can also get the sander with a Lowes protection plan, which can be helpful if something goes wrong with it.
eBay: eBay is a good option if you're looking for a used Makita 9403. You can often find the sander for a lower price than new, but be sure to inspect the sander carefully before you buy it to make sure it's in good condition.

When buying spare parts for the Makita 9403, it's important to make sure that you're getting genuine Makita parts. You can find genuine Makita parts at most of the retailers listed above.

Here are some of the most common spare parts for the Makita 9403:

Belt: The belt is the most common part that needs to be replaced on the Makita 9403. You can find replacement belts at most of the retailers listed above.
Paper backing: The paper backing is the material that the belt is attached to. It can get damaged over time, so it's a good idea to keep a spare on hand.
Grease: The Makita 9403 requires periodic lubrication. You can use a light oil or grease to lubricate the sander.

I hope this helps!

Baca Juga

Makita 9403 Problems and Solutions

The Makita 9403 is a powerful and versatile cordless drill that is well-liked by many users. However, as with any tool, it is not immune to problems. Here are some of the most common issues that Makita 9403 users experience, along with solutions:

Problem: The drill will not turn on.
Solution: Check the battery to make sure it is charged. If the battery is charged, try cleaning the battery contacts with a cotton swab and rubbing alcohol. If the drill still does not turn on, it may need to be repaired or replaced.

Problem: The drill is not drilling straight.
Solution: Make sure that the drill bit is properly inserted into the chuck. If the drill bit is inserted correctly, try adjusting the clutch setting. If the drill is still not drilling straight, it may need to be repaired or replaced.

Problem: The drill is smoking.
Solution: Immediately stop using the drill and unplug it from the charger. The drill may be overheating, which can be caused by excessive use or by using the drill in a hot environment. Allow the drill to cool down before using it again. If the drill continues to smoke, it may need to be repaired or replaced.

Problem: The drill is making a loud noise.
Solution: This could be a sign of a problem with the motor or the gears. If the noise is loud and persistent, it is best to stop using the drill and take it to a qualified technician for repair.

Problem: The drill bit is getting stuck.
Solution: This can happen if the drill bit is not inserted correctly into the chuck or if the drill bit is dull. Make sure that the drill bit is inserted correctly and try using a new, sharp drill bit. If the drill bit is still getting stuck, it may need to be repaired or replaced.

Problem: The drill is not working as well as it used to.
This could be a sign that the drill is wearing out. If the drill is still under warranty, you may be able to get it repaired or replaced for free. If the drill is not under warranty, you may need to purchase a new one.

These are just some of the most common problems that Makita 9403 users experience. If you are experiencing any of these problems, please consult the Makita 9403 owner's manual for further instructions or contact Makita customer service for assistance.

Makita 9403 Manual

Makita 9403 Belt Sander Manual

Safety Information

Read all instructions carefully before using this tool.
Do not use this tool if it is damaged or not working properly.
Keep this tool out of the reach of children.
Always wear safety glasses when using this tool.
Use the correct type and size of abrasive belt for the job.
Do not overload the tool.
Never use this tool in a wet or damp environment.
Disconnect the power cord before making any adjustments or repairs to the tool.

Before Use

Inspect the tool for any damage before using it.
Make sure that all nuts, bolts, and screws are tightened securely.
Check the condition of the abrasive belt. If the belt is damaged, replace it immediately.
Assemble the tool according to the instructions in the manual.

Troubleshooting

If the tool does not start, check the power cord to make sure that it is plugged in properly.
If the tool stalls, release the trigger and allow the motor to cool down.
If the tool produces excessive noise or vibration, stop using the tool and contact Makita for service.

Maintenance

Keep the tool clean and free of debris.
Inspect the tool regularly for any signs of wear or damage.
Replace any worn or damaged parts immediately.
Do not use harsh chemicals or solvents to clean the tool.
Store the tool in a dry, cool place.

Warranty

This tool is covered by a one-year warranty. If the tool becomes defective within one year of the date of purchase, Makita will repair or replace it free of charge.

Contact Information

For more information on this tool or to obtain warranty service, please contact Makita at:

Phone: 1-800-525-6288
Email: [email protected]
Website: www.makitatools.com

Additional Information

The Makita 9403 Belt Sander is a powerful tool that can be used for a variety of sanding applications.
The tool features a 11 AMP motor that provides 1,640 feet per minute of belt speed.
The tool also features a large front grip and a low noise level for operator comfort.
The Makita 9403 Belt Sander is a great choice for woodworkers, carpenters, and other professionals who need a powerful and versatile sanding tool.