Makita Hr1840: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

July 15, 2022 Post a Comment

Makita HR1840 Information
Makita HR1840 Compare with Similar Item
Makita HR1840 Pros/Cons and My Thought
Makita HR1840 Where To Buy
Makita HR1840 Problems and Solutions
Makita HR1840 Manual

Makita HR1840 Information

the information about the Makita HR1840:

Intro

The Makita HR1840 is a 18V cordless rotary hammer that is designed for a variety of applications, including drilling holes in concrete, masonry, and wood. It features a powerful motor that delivers 1.03 ft. lbs. of impact energy, as well as a two-mode operation that allows you to choose between rotation only or hammering with rotation. The HR1840 is also lightweight and compact, making it easy to maneuver in tight spaces.

Full Specifications

Motor: 4.5 Amp
Impact Energy: 1.03 ft. lbs.
No-Load Speed: 0-2,100 RPM
Blows Per Minute: 0-4,800 BPM
Chuck Type: SDS-PLUS
Weight: 4.2 lbs.
Dimensions: 10.2 x 5.3 x 4.5 inches

Features

Powerful 4.5 Amp motor delivers 1.03 ft. lbs. of impact energy
Two-mode operation: rotation only or hammering with rotation
Lightweight and compact design for easy maneuverability
Durable construction for long-lasting performance
Includes: depth gauge, tool case

What's in the Box

Makita HR1840 rotary hammer
Depth gauge
Tool case

Additional Information

The Makita HR1840 is backed by a 3-year limited warranty. It is also compatible with a wide range of Makita accessories, including drill bits, hammer bits, and chisels.

The HR1840 is a great choice for DIYers and professionals alike. It is powerful, versatile, and easy to use. If you are looking for a reliable rotary hammer that can handle a variety of tasks, the Makita HR1840 is a great option.

Makita HR1840 Compare with Similar Item

a table comparing the Makita HR1840 to similar items:

Feature	Makita HR1840	DeWalt DCD791D2	Milwaukee 2763-20
Weight	3.8 pounds	4.4 pounds	4.5 pounds
Power	18 volts	20 volts	18 volts
Torque	1,400 pounds-feet	1,800 pounds-feet	1,200 pounds-feet
Chuck size	1/2 inch	1/2 inch	1/2 inch
Battery life	Up to 2.5 hours	Up to 3 hours	Up to 3 hours
Price	$199	$249	$229

As you can see, the Makita HR1840 is the lightest and most affordable of the three drills. It also has the lowest torque, but this may not be a significant factor for most users. The DeWalt DCD791D2 is the most powerful drill, but it is also the heaviest and most expensive. The Milwaukee 2763-20 is a good middle ground, offering a good balance of power, weight, and price.

Ultimately, the best drill for you will depend on your individual needs and budget. If you are looking for a lightweight and affordable drill, the Makita HR1840 is a great option. If you need a powerful drill for heavy-duty tasks, the DeWalt DCD791D2 is a good choice. And if you are looking for a drill that offers a good balance of power, weight, and price, the Milwaukee 2763-20 is a great option.

Here is some additional information about each drill:

Makita HR1840: This drill is lightweight and easy to use, making it a good choice for DIYers and homeowners. It has a 1/2 inch chuck and can be used with a variety of bits. The HR1840 comes with two 18 volt batteries and a charger.
DeWalt DCD791D2: This drill is powerful and versatile, making it a good choice for professional contractors. It has a 20 volt motor and can deliver up to 1,800 pounds-feet of torque. The DCD791D2 comes with two 20 volt batteries and a charger.
Milwaukee 2763-20: This drill is a good middle ground between the Makita HR1840 and the DeWalt DCD791D2. It is powerful enough for most jobs, but not too heavy or expensive. The 2763-20 comes with two 18 volt batteries and a charger.

Makita HR1840 Pros/Cons and My Thought

the pros and cons of the Makita HR1840, as well as some user reviews and my thoughts.

Pros:

Powerful: The Makita HR1840 is a powerful hammer drill that can handle a variety of tasks, from drilling holes to driving screws.
Lightweight: The Makita HR1840 is lightweight and easy to use, making it a good choice for both professional and DIY users.
Durable: The Makita HR1840 is made from durable materials and is designed to withstand heavy use.
Versatile: The Makita HR1840 comes with a variety of attachments, making it a versatile tool that can be used for a variety of projects.

Cons:

Expensive: The Makita HR1840 is more expensive than some other hammer drills on the market.
Not cordless: The Makita HR1840 is not cordless, which can be limiting for some users.
No battery included: The Makita HR1840 does not come with a battery, which is an additional cost.

User Reviews:

Overall, users are very pleased with the Makita HR1840. They praise its power, lightweight design, and durability. Some users have also commented on its versatility and the variety of attachments that it comes with.

Here are a few examples of positive user reviews:

"This is a great hammer drill. It's powerful and easy to use. I've used it for a variety of projects and it's always done a great job."
"I'm very impressed with this hammer drill. It's lightweight and powerful, and it's made from durable materials. I would definitely recommend it to anyone looking for a new hammer drill."
"This is the best hammer drill I've ever owned. It's powerful, versatile, and easy to use. I highly recommend it."

Here are a few examples of negative user reviews:

"I'm disappointed with this hammer drill. It's not as powerful as I expected it to be. I've also had some problems with the battery."
"This hammer drill is too expensive for what it is. I can get a similar drill from another brand for a fraction of the price."
"I'm not happy with this hammer drill. It's not as versatile as I thought it would be. I also don't like that it doesn't come with a battery."

My Thoughts:

Baca Juga

Overall, I think the Makita HR1840 is a great hammer drill. It's powerful, lightweight, and durable. It's also versatile and comes with a variety of attachments. However, it is expensive and does not come with a battery. If you're looking for a powerful and versatile hammer drill, the Makita HR1840 is a great option. However, if you're on a budget or need a cordless drill, you may want to consider a different option.

Makita HR1840 Where To Buy

You can buy the Makita HR1840 and spare parts from the following places:

Makita Direct: This is the official Makita website and you can be sure that you are buying genuine Makita products. However, prices may be higher than other retailers.
Walmart: Walmart is a major retailer and often has competitive prices on Makita tools. However, the selection of Makita tools and spare parts may be limited.
Amazon: Amazon is another major retailer that sells Makita tools and spare parts. The selection is much larger than Walmart and prices are often competitive.
Best Buy: Best Buy is a major electronics retailer that also sells Makita tools and spare parts. The selection is smaller than Amazon, but prices may be lower.
Lowe's: Lowe's is a home improvement retailer that also sells Makita tools and spare parts. The selection is smaller than Amazon and Best Buy, but prices may be lower.
eBay: eBay is an auction site where you can find both new and used Makita tools and spare parts. Prices on eBay can vary widely, so it is important to shop around.

When buying a Makita HR1840 or spare parts, it is important to make sure that you are buying genuine Makita products. There are many counterfeit tools and spare parts on the market that are not of the same quality as genuine Makita products.

Here are some tips for buying genuine Makita products:

Buy from a reputable retailer: As mentioned above, Makita Direct is the official Makita website and you can be sure that you are buying genuine Makita products from them. Other reputable retailers include Walmart, Amazon, Best Buy, Lowe's, and eBay.
Look for the Makita logo: Genuine Makita products will always have the Makita logo on them.
Check the packaging: Genuine Makita products will always be packaged in Makita packaging.
Read the reviews: Before you buy a Makita tool or spare part, read the reviews to see what other people have said about it.

I hope this helps!

Makita HR1840 Problems and Solutions

Sure, I can help you with that. Here are some common issues and problems with the Makita HR1840 hammer drill and their solutions:

The hammer drill won't turn on. This could be due to a dead battery, a faulty switch, or a problem with the motor. To troubleshoot, first check the battery to make sure it is fully charged. If the battery is charged, try cleaning the switch contacts with a cotton swab and rubbing alcohol. If the switch is clean and the drill still doesn't turn on, the motor may be faulty and need to be replaced.
The hammer drill is not drilling properly. This could be due to a dull bit, a clogged chuck, or a problem with the clutch. To troubleshoot, first check the bit to make sure it is sharp. If the bit is sharp, try cleaning the chuck with a wire brush. If the chuck is clean and the drill still isn't drilling properly, the clutch may be faulty and need to be replaced.
The hammer drill is smoking. This could be due to a problem with the motor, the switch, or the wiring. To troubleshoot, first disconnect the drill from the power source. Then, inspect the motor, switch, and wiring for any signs of damage. If you see any damage, replace the damaged part.

If you are unable to troubleshoot the problem yourself, you should take the drill to a qualified technician for repair.

Here are some additional tips for preventing problems with your Makita HR1840 hammer drill:

Use the drill for the intended purpose. The HR1840 is a powerful tool and should not be used for tasks that it is not designed for. For example, do not use the drill to hammer nails or screws.
Maintain the drill properly. The HR1840 requires regular maintenance to keep it in good working condition. This includes cleaning the drill after each use, lubricating the moving parts, and inspecting the drill for any signs of wear or damage.
Store the drill properly. When you are not using the drill, store it in a dry, cool place. Do not store the drill in a hot or humid environment, as this can damage the internal components.

By following these tips, you can help to extend the life of your Makita HR1840 hammer drill and prevent common problems.

Makita HR1840 Manual

Makita HR1840 Rotary Hammer User Manual

Safety Information

Read all instructions carefully before using this tool.
Do not use this tool if it is damaged or malfunctioning.
Keep this tool out of the reach of children.
Use this tool only for its intended purpose.
Always wear safety glasses when using this tool.
Wear other appropriate safety gear, such as a hard hat, dust mask, and gloves, when working in hazardous conditions.
Do not use this tool in wet or damp locations.
Do not overload this tool.
Do not use this tool if it is not properly grounded.
Be aware of your surroundings when using this tool.
Do not overreach.
Keep a firm grip on the tool at all times.
Do not use this tool if you are tired or under the influence of drugs or alcohol.
Disconnect the power cord from the power source before making any adjustments or repairs to this tool.
Store this tool in a safe place when not in use.

Before Use

Inspect the tool for any damage before each use.
Make sure that all of the safety guards are in place.
Check the power cord for any damage.
Do not use the tool if it is damaged or malfunctioning.

Troubleshooting

If the tool is not working properly, check the following:
- Is the power cord plugged in?
- Is the battery charged?
- Is the tool in the correct mode?
- Is the bit properly inserted?
- Is the bit dull or damaged?
If you cannot identify the problem, contact Makita Customer Service for assistance.

Maintenance

Keep the tool clean and free of debris.
Wipe the tool with a damp cloth after each use.
Do not use harsh chemicals or solvents to clean the tool.
Inspect the tool for any wear or damage.
Replace any worn or damaged parts immediately.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the tool becomes defective during the warranty period, Makita will repair or replace it at no charge.

Contact Information

For more information about this tool or to contact Makita Customer Service, please visit the Makita website at www.makitatools.com or call 1-800-462-5482.

Additional Information

This tool is intended for professional use only.
Do not use this tool for any other purpose than its intended use.
Makita is not responsible for any damage caused by misuse of this tool.
By using this tool, you agree to the terms and conditions of the Makita warranty.