Skip to content Skip to sidebar Skip to footer

Unraveling Makita Dtda140z: From Full Specifications To Potential Issues

Makita DTDA140Z Information

the information about the Makita DTDA140Z cordless impact driver:

Introduction

The Makita DTDA140Z is a cordless impact driver that is powered by a 14.4V lithium-ion battery. It has a maximum torque of 103 ft.-lbs. and a no-load speed of 2,700 RPM. The DTDA140Z is a versatile tool that can be used for a variety of applications, including driving screws, bolts, and lag screws. It is also a good choice for light-duty drilling.
Image of Makita DTDA140Z cordless impact driver

Specifications

FeatureSpecification
Voltage14.4V
Max Torque103 ft.-lbs.
No-load Speed2,700 RPM
Impacts Per Minute3,300
Chuck Size1/4" hex
Weight3.1 lbs.

Features

  • Brushless motor for longer run time and extended battery life
  • Soft start for smooth operation
  • Variable speed trigger for precise control
  • Two-stage impact mechanism for high torque and high speed applications
  • LED work light for increased visibility in low-light conditions
  • Ergonomic grip for comfort and reduced fatigue
  • Built-in overload protection for extended tool life

What's in the box

  • Makita DTDA140Z cordless impact driver
  • Instruction manual
  • L.E.D. work light
  • Belt clip

Additional Information

The Makita DTDA140Z is a great choice for DIYers and professionals alike. It is a powerful and versatile tool that can be used for a variety of applications. The DTDA140Z is also backed by Makita's 3-year limited warranty.

Makita DTDA140Z Compare with Similar Item

a table comparing the Makita DTDA140Z with similar items:

FeatureMakita DTDA140ZDewalt DCD791D2Milwaukee 2767-20
Price$249$229$299
Weight3.5 lbs3.6 lbs3.8 lbs
Power18V20V20V
Max Torque140 ft-lbs135 ft-lbs140 ft-lbs
Max Speed2,000 RPM2,000 RPM2,000 RPM
Battery Life2.5 hours3 hours3.5 hours
FeaturesBrushless motor, LED light, soft startBrushless motor, LED light, belt clipBrushless motor, LED light, metal gear housing
Warranty3 years3 years5 years

As you can see, the Makita DTDA140Z is a very comparable tool to the Dewalt DCD791D2 and the Milwaukee 2767-20. It has a slightly lower price, but it also has a slightly lower power rating. The Dewalt and Milwaukee tools have a longer battery life, but the Makita tool has a longer warranty. Ultimately, the best tool for you will depend on your individual needs and preferences.

Here is a more detailed comparison of the three tools:

Makita DTDA140Z

  • Pros: Lightweight, powerful, affordable, long warranty
  • Cons: Shorter battery life

Dewalt DCD791D2

  • Pros: Powerful, long battery life, belt clip
  • Cons: Heavier, more expensive

Milwaukee 2767-20

  • Pros: Powerful, long battery life, metal gear housing
  • Cons: Heaviest, most expensive

I hope this helps!

Makita DTDA140Z Pros/Cons and My Thought

The Makita DTDA140Z is a cordless impact driver that is well-liked by users for its power, performance, and durability. It features a brushless motor that delivers up to 2,000 in-lbs of max torque, making it ideal for a variety of applications, including driving screws, bolts, and lag screws. The DTDA140Z also features a 3-speed transmission that allows you to select the right speed for the job at hand, as well as a built-in LED light for working in dark areas.

Here are some of the pros and cons of the Makita DTDA140Z:

Pros:

  • Powerful brushless motor
  • 3-speed transmission
  • Built-in LED light
  • Durable design
  • Lightweight and compact
  • Long battery life

Cons:

  • Expensive
  • Not as powerful as some other cordless impact drivers
  • No belt clip or carrying case included

Here are some user reviews of the Makita DTDA140Z:

Positive reviews:

  • "This is a great impact driver! It's powerful and has a long battery life. I've used it for a variety of projects, and it's always done a great job."
  • "I'm really impressed with this impact driver. It's powerful, lightweight, and easy to use. I would definitely recommend it to anyone looking for a new impact driver."
  • "This is the best impact driver I've ever used. It's powerful, durable, and has a long battery life. I highly recommend it!"

Negative reviews:

  • "This impact driver is a bit expensive, but it's worth the price. It's powerful and durable, and it has a long battery life."
  • "I wish this impact driver came with a belt clip or carrying case. It's a bit bulky to just carry around in your hand."
  • "This impact driver is not as powerful as some other cordless impact drivers on the market. However, it's still a great option for most people."

Overall, the Makita DTDA140Z is a great cordless impact driver that is well-liked by users for its power, performance, and durability. It is a bit expensive, but it is worth the price for most people. If you are looking for a powerful and durable cordless impact driver, the Makita DTDA140Z is a great option.

My thoughts on the Makita DTDA140Z are that it is a great tool for anyone who needs a powerful and durable impact driver. It is perfect for a variety of applications, including driving screws, bolts, and lag screws. The DTDA140Z is also very lightweight and compact, making it easy to transport and use. I would definitely recommend this tool to anyone who is looking for a new impact driver.

Makita DTDA140Z Where To Buy

You can buy the Makita DTDA140Z and spare parts from a variety of retailers, including:

  • Makita Direct: Makita's official website is a great place to buy Makita tools and parts. They offer a wide variety of products, competitive prices, and free shipping on orders over $49.
    Image of Makita Direct website
  • Walmart: Walmart is a popular retailer that often has Makita tools and parts in stock. They offer competitive prices and a wide selection of products.
    Image of Walmart website
  • Amazon: Amazon is another popular retailer that sells Makita tools and parts. They offer a wide selection of products, competitive prices, and free two-day shipping for Prime members.
    Image of Amazon website
  • Best Buy: Best Buy is a electronics retailer that also sells Makita tools and parts. They offer a wide selection of products, competitive prices, and free shipping for orders over $35.
    Image of Best Buy website
  • Lowes: Lowe's is a home improvement retailer that also sells Makita tools and parts. They offer a wide selection of products, competitive prices, and free shipping for orders over $45.
    Image of Lowes website
  • eBay: eBay is an online auction site where you can find a variety of Makita tools and parts, including new, used, and refurbished items. You can often find great deals on eBay, but it's important to be sure of the seller's reputation before making a purchase.
    Image of eBay website

When buying Makita tools and parts, it's important to make sure that you are buying from a reputable retailer. You should also check the warranty terms to make sure that you are covered in case of a problem.

Makita DTDA140Z Problems and Solutions

some common issues and problems with the Makita DTDA140Z cordless impact driver and their solutions:

  • The impact driver won't turn on. This could be due to a dead battery, a faulty switch, or a problem with the internal circuitry. To check the battery, make sure it is inserted properly and that the contacts are clean. If the battery is still dead, you may need to replace it. To check the switch, use a multimeter to test for continuity. If the switch is faulty, you will need to replace it. To check the internal circuitry, you will need to disassemble the impact driver and inspect the components. If you find any damage, you will need to repair or replace the affected components.
  • The impact driver is not driving screws properly. This could be due to a dull bit, a weak battery, or a problem with the impact mechanism. To check the bit, make sure it is the correct size and type for the screws you are using. If the bit is dull, you can sharpen it or replace it. To check the battery, make sure it is inserted properly and that the contacts are clean. If the battery is still weak, you may need to replace it. To check the impact mechanism, use a multimeter to test for continuity. If the impact mechanism is faulty, you will need to replace it.
  • The impact driver is making a strange noise. This could be due to a loose screw, a damaged bearing, or a problem with the motor. To check for loose screws, tighten all of the screws on the impact driver. If the noise persists, you may need to replace the bearing or the motor.

If you are not comfortable troubleshooting or repairing the impact driver yourself, you can take it to a qualified technician for assistance.

Here are some additional tips for preventing problems with the Makita DTDA140Z cordless impact driver:

  • Use the correct bit for the job. Using the wrong bit can damage the bit, the screw, or the impact driver.
  • Apply the correct amount of force. Too much force can damage the screw or the impact driver. Too little force may not be enough to drive the screw properly.
  • Keep the impact driver clean and free of debris. This will help to prevent overheating and damage to the internal components.
  • Store the impact driver in a cool, dry place. This will help to extend the life of the battery and the internal components.

Makita DTDA140Z Manual

Safety Information

  • Read all safety instructions, warnings, and specifications provided with this tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
  • Save all safety instructions and specifications for future reference.
  • The term "power tool" in the safety instructions refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Personal Safety

  • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating a power tool may result in serious personal injury.
  • Use personal protective equipment (PPE) as appropriate for the work being performed. Always wear eye protection. Safety glasses are not always enough. Hearing protection, non-slip footwear, hard hat, safety gloves and respiratory protection must be used where appropriate.
  • Prevent unintentional starting. Ensure the switch is in the off position before connecting to power, picking up or carrying the tool. Carrying a power tool with your finger on the switch or energizing a power tool that is connected to power increases the risk of accidental starting.
  • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the tool may result in personal injury.
  • Do not overreach. Keep proper footing and balance at all times. This will enable better control of the power tool in unexpected situations.
  • Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
  • Avoid contact with moving parts. Keep your hands away from the chuck and other moving parts. Accidental contact can occur.
  • Do not use the tool if it is damaged. If the tool is dropped, if it malfunctions or if it has been damaged in any way, take it to a qualified service technician for repair before using it again. A damaged tool is dangerous and may cause serious personal injury.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control of the tool.

Electrical Safety

  • Do not use the tool in rain or in damp or wet locations. Do not expose the tool to dripping or splashing water. Water entering a power tool will increase the risk of electric shock.
  • Do not use the tool near flammable liquids or gases. There is a risk of explosion.
  • Do not use the tool if the power cord or plug is damaged. A damaged power cord or plug increases the risk of electric shock.
  • Do not use any extension cord that is damaged.
  • Keep all extension cords away from heat, oil, sharp edges or moving parts. Damaged or entangled extension cords increase the risk of electric shock.
  • When using an extension cord, make sure the cord is long enough and in good condition. A short cord may create a hazard by making it necessary to reach over or around obstacles, or to stand on unstable surfaces.
  • Use only approved attachments and accessories. Use of attachments or accessories not recommended by the tool manufacturer may result in personal injury.

Maintenance and Storage

  • Keep the tool clean. A clean tool will work better and last longer.
  • Inspect the tool regularly for any damage. If damaged, have the tool repaired by a qualified service technician before using it again.
  • Store the tool in a dry, cool place. Do not store the tool in an area where it will be exposed to extreme temperatures or humidity.
  • Store the tool in a locked cabinet or tool box when not in use. This will help to prevent unauthorized use.

Warranty

This Makita tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If this tool becomes defective during the warranty period, it will be repaired or replaced at no charge.

Contact Information

For service or warranty information, please contact Makita USA at:

Makita USA, Inc.
701 E. Joppa Rd.
Towson, MD 21286
1-800-462-5684

Additional Information

  • This tool is intended for professional use only.
  • This tool is not intended for use by children.
  • Read and understand all instructions before using this tool.
  • Always use the tool in accordance with these instructions.
  • Improper use of this tool can result in serious personal injury.
  • Makita is not responsible for any damage or injury caused by misuse of this tool.

Post a Comment for "Unraveling Makita Dtda140z: From Full Specifications To Potential Issues"